STANDARD electric car fire blanket
Certified single-use fire blankets for electric vehicles
VLITEX STANDARD fire blankets are single-use blankets. Used for conventional or electric vehicle fires, the fire blanket helps isolate and control the fire.
Price: from 1 320,00 € HT
In the event of a lithium-ion battery fire, the battery burns in a controlled manner under the fire blanket without endangering nearby objects and with significantly reduced ambient temperature and smoke development.
Every day, firefighters extinguish fires involving vehicles or industrial machinery. Most often, they use foam, powder, or water for this purpose. It is virtually impossible to prevent toxic substances from being released into the air or groundwater.
VLITEX is taking a new approach. Certified for use up to 1,000°C, the Premium S fire blanket acts as a shield against fire. It helps control the fire and slow its spread, with a significant and immediate reduction in smoke and temperature. Toxic vapors remain under the blanket.
Base Materials:
Base Material: 550g/m² special fiberglass fabric with a silicone coating on both sides.
Acid and chemical resistant.
Assembled with flame-retardant sewing thread.
Silicone-coated fastening straps and pull handles.
Temperature Resistance: Up to 1,000°C
Use: Single use.
Maintenance-free; the material is weather-resistant and non-corroding.
Size and Weight:
6 x 8 m – 48 m² surface area – approximately 27 kg
Other sizes available upon request. Designed for battery fires.
The main advantages of the STANDARD - VLITEX fire blanket
- Maintenance-free
- Environmentally friendly
- Smoke insulation
- Weather resistant
- Fast and intuitive handling
- Extreme temperature resistance up to 1000°C
- Single use
- No contamination of the environment by water or other extinguishing agents
Our solution
Immediate control of lithium-ion battery fires using VLITEX blankets
This is the maximum time required, after installation of the VLITEX fire blanket, for a significant reduction in smoke.
This is the quantity of water and extinguishing agents required to extinguish the fire following the installation of the cover (so-called conventional fires)
This is the time required to control the temperature and overcome thermal runaway.
A project, questions about a product, need a quote?